reliability curve

英 [rɪˌlaɪə'bɪlɪti kɜːv] 美 [rɪˌlaɪə'bɪləti kɜːrv]

网络  可靠性曲线

计算机



双语例句

  1. When strength degenerates, reliability decreases with time more obviously, and the failure rate has the feature of a bathtub curve.
    强度退化时,可靠度随时间降低较为明显,失效率具有“浴盆”曲线的特征。
  2. Stress Fatigue Life Reliability Curve Analysis with Moment Method
    基于矩法的应力疲劳寿命可靠性曲线分析方法
  3. Enhancing the Reliability of log curve correlation between wells by using optimal pursue
    用寻优追踪法提高测井曲线井间对比可靠性
  4. It is urgent for engineering to build high accuracy and high reliability in-situ strength curve ( empirical formula) for lack of in-situ data.
    工程上迫切需要在现场数据较少的情况下,建立高精度和高可靠度的现场测强曲线(经验公式)。
  5. Then, an approach is developed to calculate fatigue reliability by means of damage state analysis. With such an approach, the fatigue reliability under random loading can be calculated as long as the original P-S-N curve is available.
    使用该方法,可以根据已知的材料或零件的原始PSN曲线,借助剩余寿命分布和载荷循环数&疲劳寿命干涉分析计算随机载荷作用下的疲劳可靠度。
  6. By data processing, error analysis and reliability analysis, the results indicate that using the exiting curve to calculate the structure strength the error is very big and the strength is doubtful.
    通过试验数据处理,回归分析、误差分析,试验结果表明:原测强曲线推定强度偏高,误差较大,可信度不足;
  7. A reliability evaluation method for P-T curve based on multi-sample time series analysis is proposed.
    提出一种用于评估固体火箭发动机内弹道压强&时间曲线(P-T曲线)的多样本时间序列方法。
  8. In the current steel structure design code ( TJ 17-74), a single curve was adopted for designing axially compressive members and the reliability of the column analyzed previously was based on this curve.
    现行钢结构设计规范(TJ17-74)的轴心受压构件是采用单一的柱子曲线,我们曾按此曲线分析过柱子的可靠度。
  9. The reliability analysis for the crack growth resistance curve of thin plates
    薄板裂纹扩展阻力曲线的可靠性分析
  10. The optimum bubble radius is determined via the reliability curve.
    最后通过可靠性曲线决定最优的泡泡半径。
  11. Reliability Design on Curve-locking in Imcomplete Gearing
    不完全齿轮机构中锁止弧的可靠设计
  12. For safety and reliability of fatigue analysis the reliability and confidence of a S N curve are considered.
    为了用aSN曲线进行耐久性分析或疲劳分析时的安全可靠,给出了给定置信水平和可靠度下的aSN曲线。
  13. Reliability of the metalized capacitor is discussed on the basis of three stages of the bathtub curve.
    本文将结合浴盆曲线的3个阶段对金属化电容器的可靠性进行讨论。
  14. The fatigue life under a certain reliability and the component reliability curve is gained.
    计算了一定可靠性下的疲劳萌生寿命,得出了在一定使用寿命时结构的可靠度曲线。
  15. Based on traditional structural vibration analysis, the effects of mean stress and its scatter have been introduced into the vibrational reliability model of structures by use of Goodman curve and the interference theory of stress and strength.
    基于传统的结构振动分析,利用Goodman曲线和应力-强度干涉理论,将结构的平均应力及其分散性的影响引入结构振动可靠性模型。
  16. Statistical Model for Determining the Structural Fatigue Reliability Design Curve under Limited Data
    有限数据下结构疲劳可靠性设计曲线的统计模型
  17. Method of reliability evaluation for P-T curve based on multi-sample time series analysis
    多样本时间序列的P-T曲线可靠性评估方法
  18. Based on the overall reliability evaluation on generation systems in China, the definition and calculation algorithm of optimal reliability index are proposed in the paper. The reliability index curve is presented and the reliability index standard is suggested and discussed.
    在对我国发电系统的可靠性进行全面评估的基础上,提出了发电系统最优可靠性指标的定义和计算方法,归纳出我国综合最优发电系统可靠性指标曲线,并推荐了可靠性指标。
  19. Reliability analysis of acceleration corrosion factor for fatigue critical components based on the c& t curve
    基于C&T曲线的加速腐蚀因子分析
  20. We can calculate the dispersibility of resistance change and get the reliability values of experiment by the fitting curve.
    通过此函数关系可计算任意电阻变化量的分散性,进一步求得实验值的可靠性。
  21. The reliability of the result is proved by the data of geologic characteristics capillary pressure curve, relative permeability curve and well production.
    并根据该气田地质特征及毛管压力曲线、相渗透率曲线、试采等资料,研究证明了结论的可靠性。
  22. Using the model of logarithmic normal random variables to describe crack propagation processes, a reliability life curve is presented for the structures with multiple cracks under corrosive environment, by considering the influences of the air during corrosion flight and the randomicity of crack propagation.
    通过综合考虑空中飞行腐蚀和裂纹扩展随机性的影响,采用对数正态随机变量模型描述裂纹扩展过程,得到可靠度寿命曲线。
  23. According to the reliability calculation and regression analysis, the calculating procedure of ρ-ν curve of C/ Cu composite material at the different reliabilities is obtained.
    通过回归分析和可靠度计算,得到在给定磨损率下C/Cu复合材料在不同可靠度下的p&v曲线族及其计算方法,为使用C/Cu复合材料提供了设计数据。
  24. A statistical model, confidence-survival probability-strength-life ( C-P-S-N) curves, is suggested for determining the reactor structural fatigue reliability design S-N curve under limited data.
    提出了有限数据下确定反应堆结构疲劳可靠性设计S-N曲线的统计模型。
  25. With the development of more bigger and intelligentized wind turbine, it must have more reliability, coefficient of wind power and better power curve. so the variable pitch technology is coming. Comparing the invariable pitch, the variable pitch has more advantage.
    随着风力发电机组大型化,智能化的发展,风力机必须具有较高的可靠性、风能利用系数和不断优化的输出功率曲线,变桨距技术随之产生。
  26. On this basis, put forward some suggestions to improve reliability of electronic pressure meter* Finally, work out reliability simulation software by MATLAB. By operating the interactive interface, the user can get the reliability correlation curve.
    在此基础上,提出改善压力计可靠性的一些建议。最后,利用MATLAB编制可靠性仿真软件,用户通过操作人机交互界面,可以得到可靠性相关曲线和寿命。
  27. The topic develops a set of CNC cutting machine with good stability and high reliability under the guiding of the open-architecture CNC theory, it has automatic programming function and NURBS curve interpolation. Firstly, build system hardware platform.
    本课题以开放式数控结构形式为指导思想,开发出一套具备自动编程功能和NURBS曲线插补功能的稳定性好、可靠性高的切割机数控系统。首先,火焰切割机数控系统软硬件平台的搭建。
  28. As for reliability, this article has exhibited the curve of failing transistors and the trend of void expansion under thermal shocks.
    在可靠性方面,提出空洞在热冲击下变大这一趋势问题以及空洞晶体管的失效曲线。